3
In the Resume Printing dialog box, enter the quantity
to print and click OK.
For details, refer to the imagePROGRAF Printmonitor help file.
Deleting Saved Jobs
Deleting Saved Jobs
Delete saved print jobs stored on the printer's hard disk as follows.
This operation is available from the Control Panel, in RemoteUI, imagePROGRAF Status Monitor, and imagePROG-
RAF Printmonitor.
Using the Control Panel
1
On the Tab Selection screen of the Control Panel, press â—€ or â–¶ to se-
lect the Job tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Job Menu is displayed.
3
Press â–² or â–¼ to select Stored Job, and then press the OK button.
4
Press ▲ or ▼ to select the box number (in the range 00–29), and then press the OK button.
Note
• Enter a password if one has been set, and then press the OK button.
5
Press â–² or â–¼ to select Job List, and then press the OK button.
6
Press â–² or â–¼ to select the saved job, and then press the OK button.
7
Press â–² or â–¼ to select Delete, and then press the OK button.
8
Press â–² or â–¼ to select Yes, and then press the OK button.
Deleting Saved Jobs
iPF6400S
User's Guide
Print Job Management Basic Print Job Operations
734
To Next Page
Loading...
Need help?
General