Cause Corrective Action
The NetWare server and services
are not configured correctly.
2.
Make sure there is enough free disk space on the NetWare file server. Insufficient disk space may
prevent you from processing large print jobs.
3.
Start NWADMIN or PCONSOLE and confirm that the print service is configured correctly and the print
queue is available.
4.
If data transmission to a printer on another subnet fails, deactivate NCP burst mode in that printer's
network protocol settings.
5.
If the printer is used in queue server mode, specify Other/Unknown as the printer type.
The printer was turned off and on
when not disconnected from the
server.
Leave the printer off for at least 30 seconds, and then restore power.
Cannot print over AppleTalk or Bonjour networks
Cannot print over AppleTalk or Bonjour networks
Cause Corrective Action
The AppleTalk protocol is not ena-
bled on the printer.
Activate AppleTalk on the printer.
(See "Configuring the Printer's AppleTalk Network Settings.") âž” P.691
The computer you are trying to print
from is not configured correctly.
Make sure the computer's AppleTalk settings are configured correctly.
(See "Configuring the Destination for AppleTalk Networks (Mac OS).") âž” P.690
(See "Configuring the Destination for Bonjour Network (Mac OS).") âž” P.690
The computer and printer are not on
the same network.
Due to the nature of Bonjour, you cannot print if the printer is on another network behind a router. Make
sure the computer and printer are on the same network. For information about network settings, ask your
network administrator.
iPF6400S
Cannot print over AppleTalk or Bonjour networks
User's Guide
Troubleshooting Cannot print over a network
963
To Next Page
Loading...
Need help?
General