Messages regarding printing or adjustment
Messages regarding printing or adjustment
Cannot execute this command. Use other paper. .................................................................................................. 983
Cannot print as specified. ................................................................................................................................................. 983
Cannot adjust printhead. ................................................................................................................................................... 988
Cannot calibrate. ................................................................................................................................................................... 984
Excessive temperature or humidity. .............................................................................................................................. 984
Please execute common calibration. ............................................................................................................................ 984
Please commn calibrt using above paper. .................................................................................................................. 985
Please calibrate using above paper. ............................................................................................................................. 985
Before borderless printing, move the blue platen switch. ................................................................................... 985
Borderless printng not possible. ..................................................................................................................................... 979
Blue platen switch is dirty. ................................................................................................................................................. 985
Move the blue platen switch No.xx to the right. (xx represents a number) ................................................. 985
Cannot adjust paper feed. ................................................................................................................................................ 985
Check printed document. .................................................................................................................................................. 986
Spectrophotometer Unit not connected. .................................................................................................................... 986
Spectrophotometer Sensor not mounted. ................................................................................................................. 986
Spectrophotometer Unit Calibration white tile error. ............................................................................................ 986
Spectrophotometer Unit eject guide not mounted. ............................................................................................... 986
Spectrophotometer Unit Backing plate error. .......................................................................................................... 986
Spectrophotometer Sensor Cover open. .................................................................................................................... 987
Spectrophotometer Unit cover open. .......................................................................................................................... 987
Spectrophotometer read error. ...................................................................................................................................... 987
Clean calibration white tile because it may be dirty. .............................................................................................. 987
Cannot execute this command. Use other paper.
Cannot execute this command. Use other paper.
Cause Corrective Action
Paper compatible
with color calibration
is not loaded.
1.
Press the OK button to clear the error.
2.
Load paper that is compatible with color calibration.
See the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.") âž” P.500
Always make sure the loaded paper matches the type of paper in the printer paper settings. Adjustment cannot be
completed correctly unless the loaded paper matches the settings.
Cannot print as specified.
Cannot print as specified.
"Replace paper with A4/LTR (vertical) or larger"
Cause Corrective Action
The loaded paper is too small.
(When you have attempted to print a test print sheet
or other printer status information.)
Replace the paper with paper of A4/Letter (vertical) size or larger as follows.
1.
Press â–² or â–¼ to select Change Paper, press the OK button, and remove the paper.
(See "Removing Sheets.") âž” P.544
2.
Switch to paper A4/Letter (vertical) or larger.
(See "Loading and Printing on Sheets.") âž” P.25
The printer will resume printing.
iPF6400S
Cannot execute this command. Use other paper.
User's Guide
Error Message Messages regarding printing or adjustment
983
To Next Page
Loading...
Need help?
General