*3: Normally, you will need to ensure an unobstructed space of 800 mm (31.5 in) in front of the printer, 300 mm (11.8 in) behind, 150 mm
(5.9 in) on both sides, and 300 mm (11.8 in) above the printer. Only when printing from the Front Paper Feed Slot, leave 1,300 mm
(51.2 in) of unobstructed space in front of the printer and 700 mm (27.6 in) behind it.
Printing performance
Print method Bubblejet
Maximum resolution 2400 dpi horizontally (*1) × 1200 dpi vertically
Printhead PF-05 ×2
Number of nozzles C,PC,PM,GY : 2560 nozzles X 2
BK,MBK,M,Y: 2560 nozzles X 1
*1: Prints with a minimum 1/2400 inch dot pitch between ink droplets.
Memory and hard disk
Memory 256 MB
Hard disk capacity 250 GB
Personal mail boxes (Permanent storage
area)
140 GB
Print job storage capacity Common Box 100 jobs
Personal Boxes 100 jobs
Interface
Hi-Speed USB Format Internal port
Mode Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
Connector Series B (4-pin)
Gigabit Ethernet Format Internal port
Specification IEEE 802.3 10Base-T,
IEEE 802.3u 100Base-TX/Auto-Negotiation,
IEEE 802.3ab 1000Base-T/Auto-Negotiation,
IEEE 802.3x Full Duplex
Protocols IPX/SPX (Netware 4.2, 5.1, 6.0), SNMP (Canon-MIB compatible),
HTTP, TCP/IP (IPv4/IPv6), AppleTalk
Ink
For information on the ink the printer supports, see "Ink Tanks." âž” P.882
Paper
For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Displaying the
Paper Reference Guide.") âž” P.500
Paper width For information on the paper widths the printer supports, see "Paper Sizes." âž” P.496
Minimum paper length Rolls 203.2 mm (8.0 in)
Sheets Top Paper Feed Slot 279.4 mm (11.0 in)
Front Paper Feed Slot
(When the Spectrophotometer Unit is
not mounted)
350 mm (13.8 in)
iPF6400S
Specifications
User's Guide
Specifications Printer Specifications
997
To Next Page
Loading...
Need help?
General