Note
• You can exit the color calibration in the middle by clicking the Cancel button. However, it may take some time to
end.
8
Click the OK button.
Acquiring Color Measurement Data For Any Color Chart
Acquiring Color Measurement Data For Any Color Chart
The procedure for printing a color chart, measuring the colors, and saving the color measurement data on a computer
is as follows.
The color measurement data saved on the computer can be used such as for creating ICC profiles. ICC profiles are
created using commercially available software.
Created ICC profiles can be used by the printer driver. (See "Matching pane.") âž” P.357
Note
• This step can be executed when a printer that has a spectrophotometer unit installed is selected.
Getting the Printer Ready
1
Confirm whether the paper to be loaded can be used for acquiring color measurement data.
(See "Displaying the Paper Reference Guide.") âž” P.500
2
Load the paper.
(See "Loading Rolls on the Roll Holder.") âž” P.507
(See "Loading Rolls in the Printer.") âž” P.509
Note
• If Adj. Quality has not been executed even once on the paper you are using, execute Adj. Quality in the control
panel menu.
(See "Automatic Banding Adjustment.") âž” P.771
3
Select the White/Black Backing Plate color.
(See "Switching the White/Black Backing Plate (Optional) Color.") âž” P.804
Acquiring Color Measurement Data For Any Color Chart
iPF6400S
User's Guide
Color Management Color Calibration Management Console (Mac OS)
866
To Next Page
Loading...
Need help?
General