EasyManua.ls Logo

Canon imagePROGRAF iPF6400S - Handling Sheets; Loading Sheets in the Feed Slot

Canon imagePROGRAF iPF6400S
1022 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Handling sheets
Handling sheets
Loading Sheets in the Feed Slot ..................................................................................................................................... 533
Changing the Type of Paper ............................................................................................................................................ 512
Removing Sheets ................................................................................................................................................................... 544
Clearing a Jammed Sheet, Fed Manually ............................................................................................................. 941
Clearing Jammed Paper (Paper Feed Slot) ......................................................................................................... 944
Lowering the Up-down Unit of the Spectrophotometer Unit (option) Manually ....................................... 531
Loading Sheets in the Feed Slot
Loading Sheets in the Feed Slot
When printing on individual sheets, load the sheet in the Top Paper Feed Slot. However, for heavyweight paper such
as POP board, load the sheet in the Front Paper Feed Slot.
Selecting the Paper Source and Type of Paper
If a print job was received
Sheets are automatically selected, and the media type and size specified by the print job are shown on the Display
Screen.
1
Press or to select Load Paper, and then press the OK button.
2
Load the sheet in the Top Paper Feed Slot or Front Paper Feed Slot, depending on the type of paper specified
by the print job.
If a type of paper other than POP Board is selected
Loading Sheets in the Top Paper Feed Slot P.534
If POP Board is selected
Loading Heavyweight Sheets in the Front Paper Feed Slot P.536
If no print job was received
1
Press the Load button.
2
Press or to select Manual Paper, and then press the OK button.
Note
If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press or to select Yes, and then press the OK button. Remove the paper and go to the next step.
iPF6400S
Loading Sheets in the Feed Slot
User's Guide
Handling and Use of Paper Handling sheets
533

Table of Contents

Other manuals for Canon imagePROGRAF iPF6400S

Related product manuals