3
Press â–² or â–¼ to select the type of paper, and then press the OK button.
When printing on heavyweight paper, select POP Board and load the sheet in the Front Paper Feed Slot. (See
"Loading Heavyweight Sheets in the Front Paper Feed Slot.") âž” P.536
When printing on other types of paper, select the type of paper and load the sheet in the Top Paper Feed Slot.
(See "Loading Sheets in the Top Paper Feed Slot.") âž” P.534
Note
• For details on types of paper to select, see the Paper Reference Guide. (See "Displaying the Paper Reference
Guide.") âž” P.500
Loading Sheets in the Top Paper Feed Slot
Important
• One sheet of paper can be loaded at a time. Do not load multiple sheets. This may cause paper jams.
• Before feeding paper or printing, make sure the sheet is flat against the Paper Tray Cover. The sheet may jam if it curls
before feeding or printing and the trailing edge drops toward the front.
• Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.
• Load the paper straight. Loading paper askew will cause an error. (See "Paper loaded askew..") ➔ P.977
Note
• The loading method for a printer with a Spectrophotometer Unit (option) is the same as for a printer with no Spectrophotome-
ter Unit (option). If it is difficult to perform operations from the front of the printer, lower the Up-down Unit. (See "Lowering the
Up-down Unit of the Spectrophotometer Unit (option) Manually.") âž” P.531
• Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.
1
Open the Paper Tray Cover (a), and then open the Tray
Extension (b).
Loading Sheets in the Feed Slot
iPF6400S
User's Guide
Handling and Use of Paper Handling sheets
534
To Next Page
Loading...
Need help?
General