Set CutDustReduct. to On as follows.
1
On the Tab Selection screen of the Control Panel, press â—€ or â–¶ to se-
lect the Paper tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the
OK button.
The Paper Menu is displayed.
3
Press â–² or â–¼ to select Paper Details, and then press the OK button.
4
Press â–² or â–¼ to select the type of paper loaded in the printer, and then press the OK button.
5
Press â–² or â–¼ to select CutDustReduct., and then press the OK button.
6
Press â–² or â–¼ to select On, and then press the OK button.
Roll Holder Set
Roll Holder Set
Load a roll on the roll holder and then load the holder in the printer. The Roll Holder in the Roll Holder Set RH2-25 is for
use with both 2-inch and 3-inch paper cores. Use the correct attachment for the particular paper core. For borderless
printing on A1 (594 mm) or A2 (420 mm) rolls, attach the included Spacer for Borderless Printing to the Roll Holder.
(See "Loading Rolls on the Roll Holder.") âž” P.507
•
Roll Holder Set RH2-25
•
Roll Holder (for 2- and 3-inch paper cores)
•
Attachments
Using Rolls with a 2-inch Paper Core Using Rolls with a 3-inch Paper Core
Holder Stopper (for 2-inch paper cores) Holder Stopper (for 3-inch paper cores) 3-Inch Paper Core Attachment
iPF6400S
Roll Holder Set
User's Guide
Handling and Use of Paper Handling rolls
529
To Next Page
Loading...
Need help?
General