Using Rolls with a 2-inch Paper Core Using Rolls with a 3-inch Paper Core
•
Borderless Printing on A1 or A2 Rolls
Spacer for Borderless Printing
Removing the Roll Feed Unit
Removing the Roll Feed Unit
Important
• Always turn off the printer before removing the Roll Feed Unit. The printer may be damaged if you do not turn it off first.
1
Remove the roll from the Roll Feed Unit. (See "Removing the Roll from the Printer.") âž” P.514
2
Use a coin or screwdriver to loosen the screws (a) on
both sides of the back of the Roll Feed Unit, and remove
the screws.
3
Holding the Carrying Handles (a) of the Roll Feed Unit,
remove the Roll Feed Unit from the printer.
Installing the Roll Feed Unit
Installing the Roll Feed Unit
Important
• Always turn off the printer before attaching the Roll Feed Unit. The printer may be damaged if you do not turn it off first.
Removing the Roll Feed Unit
iPF6400S
User's Guide
Handling and Use of Paper Handling rolls
530
To Next Page
Loading...
Need help?
General