2
Affix the Spectrophotometer Unit to the stand using the secur-
ing bolts.
3
Grasp the blue handles on the left and right sides of the
Spectrophotometer Eject Guide, align the protruding parts of
the Spectrophotometer Eject Guide (a) with the Spectropho-
tometer Unit guide (b), and push it in until it clicks.
Preparing to Transfer the Printer
Preparing to Transfer the Printer
To protect the internal parts in transit, always follow these steps before transferring the printer to a new location.
Important
• Avoid tilting the printer excessively during transit. This may cause ink in the printer to leak and cause stains. If it is necessary
to tilt the printer in transit, contact your Canon dealer.
Note
• Depending on the state of the printer, part replacement may be necessary when preparing to transfer the printer (that is, when
you execute the printer menu item to prepare for transfer).
• This work is not necessary when carrying the printer or moving it while mounted on the optional stand.
When carrying the printer, always have three or more people securely hold the Carrying Handles in the left and right sides of
the base and keep the printer level.
Items to Prepare
Setup Guide Used for reference when packing the printer
Packaging material Used to pack the printer
New Maintenance Cartridge (2) Used to draw in ink
iPF6400S
Preparing to Transfer the Printer
User's Guide
Maintenance and Consumables Other Maintenance
923
To Next Page
Loading...
Need help?
General