Removing Sheets
Removing Sheets
Remove sheets from the printer as follows.
•
Removing sheets from the top paper feed slot âž” P.544
•
Removing heavyweight sheets from the front paper feed slot âž” P.544
Note
• The operations for a printer with a Spectrophotometer Unit (option) are the same as for a printer with no Spectrophotometer
Unit (option).
Removing sheets from the top paper feed slot
1
On the Tab Selection screen of the Control Panel, press â—€ or â–¶ to se-
lect the Paper tab (
).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Paper Menu is displayed.
3
Press â–² or â–¼ to select Eject Paper, and then press the OK button.
4
Press â–² or â–¼ to select Yes, and then press the OK button.
The paper is ejected from the front of the printer.
Important
• If the trailing edge of a sheet is not ejected, pull the sheet out, keeping the front edge level. Accidentally removing
the sheet at an angle may scratch the printed surface.
Removing heavyweight sheets from the front paper feed slot
1
On the Tab Selection screen of the Control Panel, press â—€ or â–¶ to se-
lect the Paper tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Paper Menu is displayed.
3
Press â–² or â–¼ to select Eject Paper, and then press the OK button.
Removing Sheets
iPF6400S
User's Guide
Handling and Use of Paper Handling sheets
544
To Next Page
Loading...
Need help?
General