Canon imagePROGRAF iPF6400S User Manual

Network Environment
Network Environment
Network Environment
Network Environment
System requirements
The system requirements, which vary depending on your network, are as follows.
• Printing over a TCP/IP network (when using IPv4)
•
Compatible operating systems
• Windows XP
• Windows Server 2003
• Windows Vista
• Windows Server 2008
• Windows 7
• Windows 8
• Windows Server 2003 x64
• Windows Vista x64
• Windows Server 2008 x64
• Windows Server 2012 x64
• Windows 7 x64
• Windows 8 x64
• Mac OS X v10.2.8 or later
• Unix（Solaris 9）
• Unix（Red Hat 9）
•
Printing over a TCP/IP network (when using IPv6)
• Compatible operating systems
• Windows Vista
• Windows Server 2008
• Windows 7
• Windows 8
• Windows Vista x64
• Windows Server 2008 x64
• Windows Server 2012 x64
• Windows 7 x64
• Windows 8 x64
• Mac OS X v10.3.8 or later
Note
• When using IPv6, you must specify IPv6 on the Control Panel or in RemoteUI. For instructions, "Configuring TCP/IPv6
Network Settings" ➔ P.678 or see "Configuring the Printer's TCP/IP Network Settings With RemoteUI." ➔ P.679
• The imagePROGRAF printer driver is supported in Mac OS X v10.6.8 or later.
• The imagePROGRAF printer driver is not compatible with Unix.
•
Printing over an AppleTalk network
• Compatible operating systems
• Mac OS X v10.2.8–10.4
Note
• The printer cannot be used over a LocalTalk network.
• Compatible with EtherTalk Phase 2.
• The imagePROGRAF printer driver is not compatible with AppleTalk.
Network Environment
iPF6400S
User's Guide
Network Setting Network Environment
670

Canon imagePROGRAF iPF6400S Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6400S
Category	Printer
Language	English