Using the Spectrophotometer Unit (option)
Using the Spectrophotometer Unit (option)
This section provides practical examples of using the Spectrophotometer Unit to execute color calibration and make
printer adjustments.
•
Items to Prepare
•
Printer
•
Spectrophotometer Unit
•
Paper that can be used for color calibration
Note
• Make sure that your paper can be used for color calibration.
(See "Displaying the Paper Reference Guide.") âž” P.500
Executing Color Calibration from the Control Panel on the Printer
Follow the steps below to execute color calibration from the Control Panel.
To execute color calibration, all you need to do is load paper and select the menu on the Control Panel.
1
Load paper in the printer.
2
On the Tab Selection screen of the Control Panel, press â—€ or â–¶ to select (Settings/Adj. tab) and then
press OK.
3
Press â–² or â–¼ to select Adjust Printer, and then press the OK button.
4
Press â–² or â–¼ to select Calibration, and then press the OK button.
Using the Spectrophotometer Unit (option)
iPF6400S
User's Guide
Color Management Color Calibration
798
To Next Page
Loading...
Need help?
General