6
When the "Close Spectrophotometer Unit cover."
message appears, close the Spectrophotometer Unit
Cover.
7
When the "Close top cover." message appears, close
the Top Cover and press the OK button.
The paper will then be fixed and fed between the Platen
and the Back Cover.
•
If a print job was received
After the paper is advanced, the printer starts printing the print job.
•
If no print job was received
The printer now starts feeding the paper.
8
After printing, the paper is stopped momentarily with the trailing edge still held in the rollers to prevent it from
falling.
Press the OK button to release the paper.
9
Remove the sheet, keeping the front edge level as you
pull it out.
Important
• If POP Board is accidentally removed at an angle, it may scratch the printed surface.
10
Press the OK button.
iPF6400S
Loading Sheets in the Feed Slot
User's Guide
Handling and Use of Paper Handling sheets
543
To Next Page
Loading...
Need help?
General