2
Slide the Width Guide (a) to align it with the mark for the
size of paper you will load.
3
Load one sheet, printing-side up, in the Top Paper Feed
Slot.
Insert the paper until it touches the far end of the tray light-
ly.
Important
• If you load a sheet larger than A2, the sheet may fall behind the printer under its own weight. Put your hand under
the sheet to support it and prevent it from falling.
Note
• If it is difficult to load rolls from the front of the printer, load them from the back of the printer.
If the printer has a Spectrophotometer Unit (option), lowering the Up-down Unit makes it easier to perform opera-
tions from the front of the printer. (See "Lowering the Up-down Unit of the Spectrophotometer Unit (option) Manual-
ly.") âž” P.531
iPF6400S
Loading Sheets in the Feed Slot
User's Guide
Handling and Use of Paper Handling sheets
535
To Next Page
Loading...
Need help?
General