5
Open the Roll Feed Unit Cover.
6
Using both hands, rotate the Roll Holder toward the back to
rewind the roll.
Note
• If it is difficult to perform operations from the front of the printer, perform operations from the back of the printer.
If the printer has a Spectrophotometer Unit (option), lowering the Up-down Unit makes it easier to perform opera-
tions from the front of the printer. (See "Lowering the Up-down Unit of the Spectrophotometer Unit (option) Manual-
ly.") ➔ P.531
7
Holding the Roll Holder flange (a), remove the holder from
the Roll Holder Slot.
Note
• For instructions on removing rolls from the Roll Holder, see "Removing Rolls From the Roll Holder." ➔ P.516
iPF6400S
Removing the Roll from the Printer
User's Guide
Handling and Use of Paper Handling rolls
515
To Next Page
Loading...
