9
Press ▲ or ▼ to align the paper leading edge (a) with the
leading edge (c) of the metal plate (b) on the output tray.
Caution
• Do not touch the metal plate (b) as doing so may cause injuries.
Note
• If the Spectrophotometer Unit (optional) is mounted, align the paper leading edge with the leading edge (c) of the
metal plate while looking from the output tray of the Spectrophotometer Unit.
10
Print the job.
The printer stops advancing the paper after printing.
Note
• The printer can continue to receive print jobs from computers. If a print job is received and printed here, it can be
printed without the margin of about 23 cm being created at the paper leading edge.
11
Press the Feed button.
Roll paper is fed to the specified cut position and then automatically
stopped.
iPF6400S
Specifying the Cutting Method for Rolls
User's Guide
Handling and Use of Paper Handling rolls
525
To Next Page
Loading...
