Canon imagePROGRAF iPF6400S User Manual

Setting Item Description, Instructions
Interface
Setup
TCP/IP IPv4
Protocol DHCP Specify the protocol used to configure the IP address automati-
cally.
BOOTP
RARP
IPv4 Set-
tings
IP Address Specify the printer network information when using a static IP
address.
Enter the IP address assigned to the printer, as well as the net-
work subnet mask and default gateway.
The value that was automatically configured is displayed if you
have set IPv4 Mode to Automatic.
Subnet Mask
Default G/W
DNS Set-
tings
DNS Dync update Specify whether DNS server registration is updated automati-
cally.
Pri. DNS SrvAddr Specify the DNS server address.
Sec. DNS SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain Name Specify the DNS domain name.
IPv6 IPv6 Support Specify whether to connect via IPv6.
IPv6 StlessAddrs Specify whether a IPv6 stateless address is used.
DHCPv6 Specify whether DHCPv6 settings are used.
DNS Set-
tings
DNS
Dync up-
date
Statefull
Addr
Specify whether DNS server registration is updated automati-
cally.
Stateless
Addr
Pri. DNS SrvAddr Specify the DNS server address.
Sec. DNS SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain Name Specify the DNS domain name.
NetWare NetWare Specify the NetWare protocol. To apply your changes, choose
Register Setting.
Frame Type Specify the frame type to use.
Print Service Choose the print service.
AppleTalk Specify whether to use the AppleTalk protocol. To apply your
changes, choose Register Setting.
Ethernet
Driver
Auto Detect Specify the communication method. To apply your changes,
choose Register Setting.
Choose On for automatic configuration of the LAN communica-
tion protocol. Choose Off to use settings values of
Comm.Mode and Ethernet Type.
Comm.Mode Choose the LAN communication method.
Ethernet Type Choose the LAN transfer rate.
Spanning Tree Choose whether spanning-tree packets are supported over the
LAN.
MAC Address Indicates the MAC address.
Interface Print Print interface settings information.
Return Defaults Choose OK to restore Interface Setup settings to the default
values.
System
Setup
Sleep Timer Specify the period before the printer enters sleep mode.
Menu Settings iPF6400S
User's Guide
Control Panel Printer Menu
640

Canon imagePROGRAF iPF6400S Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6400S
Category	Printer
Language	English