1
Set Head Height to Super Low. (See "Troubleshooting Paper Abrasion and Blurry Images.") âž” P.769
Note
• If Super Low is not available, select Lowest.
2
Execute Standard in Head Posi. Adj..
Note
• If paper rubs against the Printhead or becomes jammed during Printhead height adjustment, try selecting a higher
level in Head Height and performing Standard again.
iPF6400S
Enhancing Printing Quality
User's Guide
Adjustments for Better Print Quality Adjustment for high-precision printing
763
To Next Page
Loading...
Need help?
General