How to Check How to Operate Displayed Content
Check in the Col-
or Calibration
Management
Console.
(See "Calibration Sheet (Mac
OS).") ➔ P.858
•
Auto Adjust: Calibration values set using the printer sensor
•
Auto Adjust (High Precision): Calibration values set using the Spec-
trophotometer Unit
Check in the
menu of the Con-
trol Panel.
From Set./Adj. Menu, select Adjust Printer >
Calibration > Calibration Log and then view
Adjustment Type.
(See "Menu Settings.") ➔ P.634
•
Common Calibration: Calibration values set using the printer sensor
(Common calibration)
•
Unique Calibration: Calibration values set using the printer sensor
(Unique calibration)
•
UniqCal HiPrec/Std: Calibration values set using the Spectrophotom-
eter Unit (Pattern Size is Standard)
•
UniqCal HiPrec/Lge: Calibration values set using the Spectrophotom-
eter Unit (Pattern Size is Large)
To Confirm the Paper Information Registered on the Printer
•
Refer to the Calibration sheet on the Color Calibration Management Console when checking details on the com-
puter.
(See "Calibration Sheet (Windows).") ➔ P.821
(See "Calibration Sheet (Mac OS).") ➔ P.858
•
To print media information, select Paper Details on the Control Panel menu.
The following is displayed in the Calibration field.
Display Meaning
Standard Supports color calibration using the printer sensor
High Precision Supports color calibration using the Spectrophotometer Unit
OK(Common) Executes Common calibration
OK(Unique) Executes Unique calibration
N/A Color calibration cannot be executed
N/A(Colorime-
try Only)
Color calibration cannot be executed, but it can be used for acquiring color
measurement data
iPF6400S
Adjustment Types of Color Calibration
User's Guide
Color Management Color Calibration
807
To Next Page
Loading...
