2
Load the paper.
(See "Loading Rolls on the Roll Holder.") âž” P.507
(See "Loading Rolls in the Printer.") âž” P.509
(See "Loading Sheets in the Feed Slot.") âž” P.533
Note
• If Adj. Quality has not been executed even once on the paper you are using when you execute Auto Adjust (High
Precision), execute Adj. Quality in the control panel menu.
(See "Automatic Banding Adjustment.") âž” P.771
3
If a spectrophotometer unit is mounted, select the White/Black Backing Plate color.
We recommend white.
(See "Switching the White/Black Backing Plate (Optional) Color.") âž” P.804
Note
• For the color of the White/Black Backing Plate, continue using the selected color without changing each time you
execute color calibration.
Executing Color Calibration
1
Open the Calibration sheet.
2
Select the printer you want to execute color calibration on
from the Printer list.
Executing Color Calibration
iPF6400S
User's Guide
Color Management Color Calibration Management Console (Windows)
828
To Next Page
Loading...
Need help?
General