2
Click the Settings button for Color Check in the Print-
er Information dialog box.
3
Enter the color check threshold value in ΔE and click the
OK button.
Getting the Printer Ready
1
Confirm whether the paper to be loaded can be used for color checks.
Paper for color check is paper that can be used with the Auto Adjust (High Precision) setting on the spectro-
photometer unit.
(See "Displaying the Paper Reference Guide.") âž” P.500
2
Load the paper.
(See "Loading Rolls on the Roll Holder.") âž” P.507
(See "Loading Rolls in the Printer.") âž” P.509
Note
• If Adj. Quality has not been executed even once on the paper you are using, execute Adj. Quality in the control
panel menu.
(See "Automatic Banding Adjustment.") âž” P.771
3
Select the White/Black Backing Plate color.
(See "Switching the White/Black Backing Plate (Optional) Color.") âž” P.804
Note
• For the color of the White/Black Backing Plate, select the color from when color calibration was executed using the
spectrophotometer unit.
(See "Executing Color Calibration.") âž” P.863
iPF6400S
Executing Color Check
User's Guide
Color Management Color Calibration Management Console (Mac OS)
873
To Next Page
Loading...
Need help?
General