Note
•
If the Spectrophotometer Unit is mounted, grasp the blue handles
on the left and right sides of the Spectrophotometer Eject Guide
and remove the Spectrophotometer Eject Guide from the Spectro-
photometer Unit.
3
Pull out the used Maintenance Cartridge by the grip (a).
Holding the cartridge by the handles (b) on both sides,
keep the cartridge level as you remove it.
Important
• Used maintenance cartridges are heavy. Always grasp the cartridge firmly and keep the cartridge level during re-
moval and storage. If you drop a used Maintenance Cartridge or store it at an angle, ink may leak and cause stains.
• The remaining Maintenance Cartridge capacity is recorded on each printer. Do not install a used Maintenance Car-
tridge in another printer.
Note
•
If the printer has a Spectrophotometer Unit, look under the
Spectrophotometer Unit to check the position of the Main-
tenance Cartridge before removing it.
4
Keep the used Maintenance Cartridge level as you put
it in the plastic bag that was in the box, as shown.
Replacing the Maintenance Cartridge
iPF6400S
User's Guide
Maintenance and Consumables Maintenance Cartridge
902
To Next Page
Loading...
