Caution
• Moving the printer requires at least three people, holding it on both sides and from behind. Be careful to avoid back
strain and other injuries.
•
When moving the printer, firmly grasp the Carrying Handles
under each side and in back. The printer may be unsteady if
you hold it at other positions, which poses a risk of injury
from dropping the printer.
Move with the printer still mounted on the Stand
1
Move the Locking Caster switch on the Stand to ON to lock
the Stand.
2
Turn the printer off.
(See "Turning the Printer On and Off.") âž” P.21
3
Unplug the power cord from the outlet.
Caution
• Always turn off the printer and unplug the power cord before cleaning or maintenance. Accidentally leaving the print-
er on poses a risk of injury if you touch moving parts inside the printer.
4
Disconnect the power cord and interface cable from the printer.
5
If you are using the optional Spectrophotometer Unit, remove the Spectrophotometer Unit from the printer as
needed.
(See "Removing and Attaching the Spectrophotometer Unit.") âž” P.920
iPF6400S
Carrying the Printer
User's Guide
Maintenance and Consumables Other Maintenance
919
To Next Page
Loading...
Need help?
General