Canon Laser Class 810 - Page 368

Machine Settings
12-38
SYSTEM SETTINGS
3. PRINT LIST Prints counter information.
Press [ ] to select <YES>.
If you do not want to print the list, press [ ] to select <NO>.
3. PDL JOBS W/OUT ID Sets if print jobs from computers with unknown IDs are
accepted or rejected.
ON Accepts print jobs from computers with unknown IDs.
OFF Rejects print jobs from computers with unknown IDs.
4. MANAGE USER ID Sets if the user ID management is used.
OFF
ON
–
–
5. NETWORK SETTINGS* Sets the network setting. (See Reference Guide > Network
Settings.)
1. TCP/IP SETTINGS Sets TCP/IP network.
1. IPv4 SETTINGS Sets TCP/IPv4 network.
1. IP ADDRESS Sets IPv4 Address settings.
1. IP ADDRESS AUTO.
2. IP ADDRESS
3. SUBNET MASK
4. GATEWAY ADDRESS
–
–
–
–
1. IP ADDRESS
AUTO.
Sets whether to automatically set an IP address.
ON Enables an IP address to the machine automatically.
1. DHCP (ON/OFF)
2. BOOTP (OFF/ON)
3. RARP (OFF/ON)
–
–
–
OFF Allocates an IP address to the machine manually.
2. IP ADDRESS Registers a fixed IP address to the machine. (See "Set the
Machine for Network Usage," in the Starter Guide.)
3. SUBNET MASK Registers a fixed subnet mask to the machine.
4. GATEWAY
ADDRESS
Registers a fixed gateway address to the machine.
2. PING COMMAND Enter the IP address of a device on the network and press [OK]
to check whether the machine can connect to that device.