Canon LBP7110Cw - Residual Images Appear on Non-printed Areas

0F40-093
Perform one of the following solutions according to the cause.
<Cause 1> Appropriate paper is not being used.
Solution
Replace the paper with that which can be used with this printer.
"Usable Paper"
<Cause 2> When 60 to 74 g/m² paper is printed, depending on the operating environment
(especially in a high-humidity environment), residual images may appear.
Solution 1
Perform the following procedure in the printer driver.
1. Display the [Paper Source] sheet.
2. Set [Paper Type] to [Thin 2].
If you change the settings, the toner may not fix onto paper well, and the printing may come out
faint.
Solution 2
Perform the following procedure in the Printer Status Window.
1. Display the Printer Status Window.
"Printer Status Window"
2. )URPWKH>2SWLRQV@PHQXVHOHFW>'HYLFH6HWWLQJV@ĺ>$VVLVWLQJ3ULQW6HWWLQJV@
3. Select the [Perform Curl Correction for Output Paper] check box.
[Perform Curl Correction for Output Paper] is enabled only when [Paper Type] in the [Paper
Source] sheet in the printer driver is set to [Thin 1].
<Cause 3> The drum in any of the toner cartridges has deteriorated.
Solution
Replace the toner cartridges with new ones.
"Replacing the Toner Cartridge"
Residual Images Appear on Non-printed Areas
㻠㻣㻠㻌㻛㻌㻡㻝㻠
Downloaded from ManualsPrinter.com Manuals