Canon LBP7110Cw - Basic Operations;Various Information for Windows

0F40-0A3
Displaying [Computer] or [My Computer]
Setting the IP Address Using the ARP/PING Command
Displaying the CD-ROM Top Page
Checking the IP Address Using the PING Command
Checking the Processor Version of Windows Vista, 7, or Server 2008
Printing a Test Page in Windows
Checking the Bi-directional Communication
Installing with Plug and Play
Displaying the Printer Folder
Checking Printers in the Print Server
Checking the Port
Values for Setting a Port
Setting for [Device Type] when Setting a Port
Displaying [Computer] or [My Computer]
From the [Start] menu, select [My Computer].
From the [Start] menu, select [Computer].
Setting the IP Address Using the ARP/PING Command
1
Make sure that the printer and computer are connected properly, and the printer is turned ON.
"Connecting the Printer and Computer"
2
Turn the computer on, and then log on to Windows as a user with administrative rights.
3
Run Command Prompt.
)URPWKH>6WDUW@PHQXVHOHFW>$OO3URJUDPV@ĺ>$FFHVVRULHV@ĺ>&RPPDQG3URPSW@
4
Enter "arp -s <IP address> <MAC address>", then press the [ENTER] key on your keyboard.
<IP address>
Enter the IP address to assign to the printer.
Specify the address with four numbers (from 0 to 255) separated with a period (.).
<MAC address>
Enter the MAC address of the printer.
Separate the number every two digits with a hyphen (-).
Input Example:
"arp -s 192.168.0.215 00-1E-8F-05-70-31"
Basic Operations/Various Information for Windows
㻡㻜㻝㻌㻛㻌㻡㻝㻠
Downloaded from ManualsPrinter.com Manuals