Canon LBP7110Cw - Square Areas That Cannot Be Seen on the Display Appear around Lines or Text and Are Printed in a Different Color from the Other Areas

0F40-09F
Perform the following procedure.
<Cause> A process that is different from the specified halftone process or color process may
be applied depending on the operating system or application.
Solution 1
Perform the following procedure in the printer driver.
1. Display the [Quality] sheet.
2. Click [Advanced Settings].
3. Set [Gray Compensation] to [Always] or [Never].
Solution 2
Perform the following procedure in the printer driver.
1. Display the [Quality] sheet.
2. Click [Advanced Settings].
3. Set [Halftones] to [Resolution], [High Resolution], or [Gradation].
Square Areas That Cannot Be Seen on the Display Appear around Lines
or Text and Are Printed in a Different Color from the Other Areas
㻠㻤㻡㻌㻛㻌㻡㻝㻠
Downloaded from ManualsPrinter.com Manuals