19. Disassemble the ground.
20. Removal of right-rear door contact switch harness
20.1. Open the right-rear door and disassemble the crews that fix the
contact switch with a cross head screwdriver, and then take off the
right-rear door contact switch.
20.2. Unplug the right-rear door contact switch plug.
21. Removal and removal of left-rear door contact switch harness
21.1. Open the left-rear door and disassemble the crews that fix the
contact switch with a cross head screwdriver, and then remove
left-rear door contact switch.
21.2. Unplug the left-rear door contact switch plug.
22. Disassemble the rigth C-pillar inner shield and then disassemble
the ground wire.
To Next Page
Loading...
