Chroma 62000D Series - Page 150

Programmable Bidirectional DC Power Supply 62000D Series
Operating and Programming Manual
5-24
Return Parameter:
LIST | STEP
Query Example:
PROG:MODE?
Return Example:
STEP
2. PROGram:RUN
Description:
Executes the program.
Syntax:
PROGram:RUN <Arg>
Parameter:
<Arg>: ON | OFF
Example:
P PROG:RUN ON
Query Syntax:
PROGram:RUN?
Return Parameter:
ON | OFF
Query Example:
PROGram:RUN?
Return Example:
ON
3. PROGram:SAVE
Description:
Saves the program.
Syntax:
PROGram:SAVE
Parameter:
None
Example:
PROG:SAVE
4. PROGram: SELected
Description:
Sets the executed program no. in List mode.
Syntax:
PROGram:SELected <NR1>
Parameter:
1 到 10
Example:
PROG:SEL 10
Query Syntax:
PROG:SEL?
Return Parameter:
<NR1>
Query Example:
PROG:SEL? It returns the program no. in use.
Return Example:
10
5. PROGram:LINK
Description:
Links a program to another at the end of a List.
Syntax:
PROGram:LINK <NR1>
Parameter:
0 to 10 (0 is not linked)
Example:
PROG:LINK 7
Query Syntax:
PROG:LINK?
Return Parameter:
<NR1>
Query Example:
PROG:LINK?
Return Example:
7
6. PROGram:COUNT
Description:
Sets the number of times for the program file is to be executed in
List mode.
Syntax:
PROGram:COUNT <NR1>
Parameter:
1 to 15000
Example:
PROG:COUNT 7
Query Syntax:
PROG:COUNT?
Return Parameter:
<NR1>
Query Example:
PROG:COUNT?
Return Example:
7
7. PROGram:PULL
Description:
Executes the PROGRAM TRIGGER input signal to enhance the
resistance control in List.