Chroma 62000D Series - Page 152

Programmable Bidirectional DC Power Supply 62000D Series
Operating and Programming Manual
5-26
Return Parameter:
<NRf+>
Query Example:
PROG:SEQ:CURR?
Return Example:
4.500000e+01
13. PROGram:SEQuence:CURRent:SLEW
Description:
Sets the sequence of current slew rate for the output in List mode.
Syntax:
PROGram:SEQuence:CURRent:SLEW <NRf+>
Parameter:
<NRf+>
Example:
PROG:SEQ:CURR:SLEW 1
Query Syntax:
PROG:SEQ:CURR:SLEW? [{MAX/MIN}]
Return Parameter:
<NRf+>
Query Example:
PROG:SEQ:CURR:SLEW?
Return Example:
1.000000e+00
Note
Source and Load current share this setting.
14. PROGram:SEQuence:CURRent:LOAD
Description:
Sets the sequence for Load current output in List mode.
Syntax:
PROGram:SEQuence:CURRent:LOAD <NRf+>
Parameter:
<NRf+>
Example:
PROG:SEQ:CURR:LOAD 45
Query Syntax:
PROG:SEQ:CURR:LOAD? [{MAX/MIN}]
Return Parameter:
<NRf+>
Query Example:
PROG:SEQ:CURR:LOAD?
Return Example:
4.500000e+01
15. PROGram:SEQuence:TIME
Description:
Sets the duration of the sequence in List mode.
Syntax:
PROGram:SEQuence:TIME <NRf+>
Parameter:
0.001~15000 seconds
Example:
PROG:SEQ:TIME 10
Query Syntax:
PROG:SEQ:TIME? [{MAX/MIN}]
Return Parameter:
<NRf+>
Query Example:
PROG:SEQ:TIME?
Return Example:
1.000000e+01
16. PROGram:CLEAR
Description:
Clears all sequences from the program selected in List mode.
Syntax:
PROGram:CLEAR
Parameter:
None
Example:
PROG:CLEAR
17. PROGram:ADD
Description:
Adds sequences to the program selected in List mode.
Syntax:
PROGram:ADD <NR1>
Parameter:
1~100 (based on the remaining sequence no. for configuration)
Example:
PROG:ADD 15
Query Syntax:
PROGram:ADD? (It returns the configurable sequence no.)
Return Parameter:
<NR1>
Query Example:
PROGram:ADD?
Return Example:
85 –it indicates the remaining no. is 85.
18. PROGram:MAX?