Chroma 62000D Series - Page 158

Programmable Bidirectional DC Power Supply 62000D Series
Operating and Programming Manual
5-32
Return Parameter:
ENABLE | DISABLE
Query Example:
SYSTem:COMMunicate:CAN:MODE?
Return Example:
ENABLE | DISABLE
14. SYSTem:COMMunicate:CAN:SCPI:ID
Description:
Sets the CAN SCPI ID.
Syntax:
SYSTem:COMMunicate:CAN:SCPI:ID <NRf+>
Parameter:
11bit: 0 to 2047, 29bit: 0 to 536870911
Example:
SYSTem:COMMunicate:CAN:SCPI:ID 1024
Query Syntax:
SYSTem:COMMunicate:CAN:SCPI:ID?
Return Parameter:
<NR1>
Query Example:
SYSTem:COMMunicate:CAN:SCPI:ID?
Return Example:
1024
15. SYSTem:COMMunicate:CAN:APPLY
Description:
Updates the CAN setting.
Syntax:
SYSTem:COMMunicate:CAN:APPLY
Parameter:
None
Example:
SYSTem:COMMunicate:CAN:APPLY
Query Syntax:
SYSTem:COMMunicate:CAN:APPLY?
Return Parameter:
DONE | UNDONE
Query Example:
SYSTem:COMMunicate:CAN:APPLY?
Return Example:
DONE | UNDONE
16. SYSTem:COMMunicate:GPIB:ADDRess
Description:
Sets the GPIB address.
Syntax:
SYSTem:COMMunicate:GPIB:ADDRess <NR1>
Parameter:
0~30
Example:
SYSTem:COMMunicate:GPIB:ADDRess 5
Query Syntax:
SYSTem:COMMunicate:GPIB:ADDRess?
Return Parameter:
<NR1>
Query Example:
SYSTem:COMMunicate:GPIB:ADDRess?
Return Example:
5
17. SYSTem:COMMunicate:SOCK:DHCP
Description:
Sets the Ethernet DHCP function.
Syntax:
SYSTem:COMMunicate:SOCK:DHCP <Arg>
Parameter:
<Arg>: ENABLE | DISABLE
Example:
SYSTem:COMMunicate:SOCK:DHCP ENABLE
Query Syntax:
SYSTem:COMMunicate:SOCK:DHCP?
Return Parameter:
ENABLE | DISABLE
Query Example:
SYSTem:COMMunicate:SOCK:DHCP?
Return Example:
ENABLE | DISABLE
18. SYSTem:COMMunicate:SOCK:GATEway
Description:
Sets the Ethernet Gateway.
Syntax:
SYSTem:COMMunicate:SOCK:GATEway <Arg>
Parameter:
<Arg>: “255.255.255.0”
Example:
SYSTem:COMMunicate:SOCK:GATEway “255.255.255.0”
Query Syntax:
SYSTem:COMMunicate:SOCK:GATEway?
Return Parameter:
“255.255.255.0”
Query Example:
SYSTem:COMMunicate:SOCK:GATEway?
Return Example:
“255.255.255.0”