Chroma 62000D Series - Page 73

Manual Operation
3-21
Figure 3-31
The way to change the Reading Average Times is shown in Figure 3-32.
3. Tap the touch screen to set the desired average times. Reading Average Time can be
set to 1, 2, 3, and 4.
Figure 3-32
1. Assuming the Reading Average Time is set to = 8, Average Method to
FIXED, readings sampling is that the device clears all of the old
samples (A1 ~ A8) in the buffer and saves the new samples (B1 ~
B8), then average them in repetition as Figure 3-33 shows.