Index
IN-4
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
debug platform stack-manager command B-58
debug platform supervisor-asic command B-59
debug platform sw-bridge command B-60
debug platform tcam command B-61
debug platform udld command B-64
debug platform vlan command B-65
debug pm command B-66
debug port-security command B-68
debug qos-manager command B-69
debug spanning-tree backbonefast command B-72
debug spanning-tree bpdu command B-73
debug spanning-tree bpdu-opt command B-74
debug spanning-tree command B-70
debug spanning-tree mstp command B-75
debug spanning-tree switch command B-77
debug spanning-tree uplinkfast command B-79
debug sw-vlan command B-80
debug sw-vlan ifs command B-82
debug sw-vlan notification command B-83
debug sw-vlan vtp command B-85
debug udld command B-87
debug vqpc command B-89
define interface-range command 2-70
delete (boot loader) command A-6
delete command 2-72
deny (ARP access-list configuration) command 2-73
deny (IPv6) command 2-75
deny command 2-80
detect mechanism, causes 2-122
device manager requirements xx
DHCP snooping
accepting untrusted packets from edge switch
2-169
enabling
on a VLAN
2-175
option 82 2-167, 2-169
trust on an interface 2-173
error recovery timer 2-124
rate limiting 2-172
DHCP snooping binding database
binding file, configuring
2-165
bindings
adding
2-163
deleting 2-163
displaying 2-466
clearing database agent statistics 2-53
database agent, configuring 2-165
displaying
binding entries
2-466
database agent status 2-468, 2-470
renewing 2-363
dir (boot loader) command A-7
directories, deleting 2-72
documentation, related xx
document conventions xix
domain name, VTP 2-763, 2-767
dot1x auth-fail max-attempts 2-92
dot1x auth-fail vlan 2-94
dot1x command 2-90
dot1x control-direction command 2-96
dot1x critical global configuration command 2-98
dot1x critical interface configuration command 2-100
dot1x default command 2-102
dot1x fallback command 2-103
dot1x guest-vlan command 2-104
dot1x host-mode command 2-106
dot1x initialize command 2-107
dot1x mac-auth-bypass command 2-108
dot1x max-reauth-req command 2-110
dot1x max-req command 2-111
dot1x pae command 2-112
dot1x port-control command 2-113
dot1x re-authenticate command 2-115
dot1x reauthentication command 2-116
dot1x timeout command 2-117
dropping packets, with ACL matches 2-6
drop threshold, Layer 2 protocol tunneling 2-224
DSCP-to-CoS map 2-279