Cisco CRS-1 - Carrier Routing System Router Getting Started Guide

8-2
Cisco CRS-1 Series Carrier Routing System Getting Started Guide
Chapter 8 Online Insertion and Removal for Switch Fabric Cards
Performing an OIR
Prerequisites
You should have a working knowledge of Cisco IOS XR software and have sufficient permissions to
configure the software.
You must log in as root-system before starting the procedure. To confirm your login status, use the
show user all command:
RP/0/RP0/CPU0:router# show user all
Username: lab
User group root-system
User group cisco-support
To confirm your login status including root, use the show user all | include root command:
RP/0/RP0/CPU0:router# show user all | include root
User group root-system
Task: root-system : READ WRITE EXECUTE NOTIFY
Task: root-lr : READ WRITE EXECUTE NOTIFY
SUMMARY STEPS
1. show platform
2. admin configure
3. show controller fabric plane all
4. controller fabric plane plane_number shut
5. show controller fabric plane all
6. no hw-module node fabric_card power
7. hw-module node fabric_node power
8. no controller fabric plane plane_number shut
9. show controller fabric plane all

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English