Cisco CRS-1 - Carrier Routing System Router Getting Started Guide

9-11
Cisco CRS-1 Series Carrier Routing System Getting Started Guide
Chapter 9 Troubleshooting the Cisco IOS XR Software
Understanding Processes and Threads
The following is sample output from the show processes memory command:
RP/0/RP0/CPU0:router# show processes memory
JID Text Data Stack Dynamic Process
55 28672 4096 69632 17072128 eth_server
164 143360 4096 20480 13238272 hfr_fgid_server
317 167936 4096 45056 10526720 syslogd
122 512000 4096 77824 9797632 bgp
265 57344 4096 57344 5877760 parser_server
254 40960 4096 143360 3084288 netio
63 8192 4096 24576 2314240 nvram
314 4096 4096 36864 1699840 sysdb_svr_local
341 495616 4096 40960 1576960 wdsysmon
259 53248 4096 28672 1490944 nvgen_server
189 32768 4096 32768 1425408 hd_drv
69 77824 4096 110592 1421312 qnet
348 323584 4096 40960 1392640 ospf
347 323584 4096 40960 1392640 ospf
346 323584 4096 40960 1392640 ospf
345 323584 4096 40960 1392640 ospf
344 323584 4096 40960 1392640 ospf
261 323584 4096 40960 1392640 ospf
--More--
monitor processes Command
This command shows the top 10 processes of CPU usage. The display refreshes every 10 seconds.
Table 9-7 describes the heading output. To change the monitor processes command to display
parameters or terminate the display and return to the system prompt, see the interactive display
characters described in Table 9-8.
Table 9-7 Heading Descriptions for monitor process Output
Output Heading Description
JID Job ID.
TIDS Thread ID.
Chans Channels (client connections) to the server.
FDs Number of files open.
Tmrs Number of timers for the process.
MEM Total memory of the process.
HH:MM:SS Run time of process since last restart.
CPU Percentage of CPU used by process thread.
NAME Process name.

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English