Cisco CRS-1 - Carrier Routing System Router Getting Started Guide

B-10
Cisco CRS-1 Series Carrier Routing System Getting Started Guide
Appendix B Upgrading and Downgrading ROM Monitor Software
Configuration Examples for ROM Monitor Upgrades
RP/0/RP0/CPU0:Router# show logging | include burner
RP/0/RP0/CPU0Jul 20 18:02:04.794 : rommon_burner[65718]: %ROMMON_BURNER-5-progre
ss : ROMMON A is programmed successfully.
LC/0/0/CPU0Jul 20 18:19:44.573 : rommon_burner[65636]: %ROMMON_BURNER-5-progress
: ROMMON A is programmed successfully.
LC/0/3/CPU0Jul 20 18:02:05.380 : rommon_burner[65636]: %ROMMON_BURNER-5-progress
: ROMMON A is programmed successfully.
SP/0/0/SPJul 20 18:02:05.907 : rommon_burner[65582]: %ROMMON_BURNER-5-progress :
ROMMON A is programmed successfully.
SP/0/SM0/SPJul 20 18:02:05.950 : rommon_burner[65584]: %ROMMON_BURNER-5-progress
: ROMMON A is programmed successfully.
SP/0/3/SPJul 20 18:02:06.244 : rommon_burner[65582]: %ROMMON_BURNER-5-progress :
ROMMON A is programmed successfully.
RP/0/RP0/CPU0:Router# show platform
Node Type PLIM State Config State
-----------------------------------------------------------------------------
0/0/SP MSC(SP) N/A IOS-XR RUN PWR,NSHUT,MON
0/0/CPU0 MSC 16OC48-POS/DPT IOS-XR RUN PWR,NSHUT,MON
0/3/SP MSC(SP) N/A IOS-XR RUN PWR,NSHUT,MON
0/3/CPU0 MSC 16OC48-POS/DPT IOS-XR RUN PWR,NSHUT,MON
0/RP0/CPU0 RP(Active) N/A IOS-XR RUN PWR,NSHUT,MON
0/SM0/SP FC/S(SP) N/A IOS-XR RUN PWR,NSHUT,MON
RP/0/RP0/CPU0:Router# upgrade rommonB all disk0
Please do not power cycle, reload the router or reset any nodes until
all upgrades are completed.
Please check the syslog to make sure that all nodes are upgraded successfully.
If you need to perform multiple upgrades, please wait for current upgrade
to be completed before proceeding to another upgrade.
Failure to do so may render the cards under upgrade to be unusable.
RP/0/RP0/CPU0:Router#LC/0/0/CPU0Jul 20 18:26:56.764 : rommon_burner[65637]: %ROM
MON_BURNER-5-progress : ROMMON B is programmed successfully.
RP/0/RP0/CPU0Jul 20 18:07:30.084 : rommon_burner[65719]: %ROMMON_BURNER-5-progre
ss : ROMMON B is programmed successfully.
LC/0/3/CPU0Jul 20 18:07:30.902 : rommon_burner[65637]: %ROMMON_BURNER-5-progress
: ROMMON B is programmed successfully.
SP/0/0/SPJul 20 18:07:30.949 : rommon_burner[65583]: %ROMMON_BURNER-5-progress :
ROMMON B is programmed successfully.
SP/0/SM0/SPJul 20 18:07:31.120 : rommon_burner[65585]: %ROMMON_BURNER-5-progress
: ROMMON B is programmed successfully.
SP/0/3/SPJul 20 18:07:31.645 : rommon_burner[65583]: %ROMMON_BURNER-5-progress :
ROMMON B is programmed successfully.
RP/0/RP0/CPU0:Router# show logging | include burner
RP/0/RP0/CPU0Jul 20 18:02:04.794 : rommon_burner[65718]: %ROMMON_BURNER-5-progre
ss : ROMMON A is programmed successfully.
LC/0/0/CPU0Jul 20 18:19:44.573 : rommon_burner[65636]: %ROMMON_BURNER-5-progress
: ROMMON A is programmed successfully.
LC/0/3/CPU0Jul 20 18:02:05.380 : rommon_burner[65636]: %ROMMON_BURNER-5-progress
: ROMMON A is programmed successfully.
SP/0/0/SPJul 20 18:02:05.907 : rommon_burner[65582]: %ROMMON_BURNER-5-progress :
ROMMON A is programmed successfully.
SP/0/SM0/SPJul 20 18:02:05.950 : rommon_burner[65584]: %ROMMON_BURNER-5-progress
: ROMMON A is programmed successfully.
SP/0/3/SPJul 20 18:02:06.244 : rommon_burner[65582]: %ROMMON_BURNER-5-progress :
ROMMON A is programmed successfully.
LC/0/0/CPU0Jul 20 18:26:56.764 : rommon_burner[65637]: %ROMMON_BURNER-5-progress
: ROMMON B is programmed successfully.
RP/0/RP0/CPU0Jul 20 18:07:30.084 : rommon_burner[65719]: %ROMMON_BURNER-5-progre

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English