Cisco ME 3400 - Unsupported Show Platform Commands; Unsupported Global Configuration Commands; Msdp; Unsupported Privileged EXEC Commands

C-10
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
Appendix C Unsupported Commands in Cisco IOS Release 12.2(50)SE
MSDP
Unsupported Global Configuration Commands
exception crashinfo
errdisable detect cause dhcp-rate-limit
errdisable recovery cause dhcp-rate-limit
errdisable recovery cause unicast flood
l2protocol-tunnel global drop-threshold
memory reserve critical
power inline consumption default wattage
service compress-config
stack-mac persistent timer
track object-number rtr
Unsupported show platform Commands
show platform ip unicast vrf {compaction | tcam-label}
show platform ipv6 unicast
show platform tb
MSDP
Unsupported Privileged EXEC Commands
show access-expression
show exception
show location
show pm LINE
show smf [interface-id]
show subscriber-policy [policy-number]
show template [template-name]
Unsupported Global Configuration Commands
ip msdp default-peer ip-address | name [prefix-list list] (Because BGP/MBGP is not supported, use the
ip msdp peer command instead of this command.)