Cisco ME 3400 - Monitoring REP

17-14
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
Chapter 17 Configuring Resilient Ethernet Protocol
Monitoring REP
Monitoring REP
Use the privileged EXEC commands in Table 17-1to monitor REP.
Ta b l e 17-1 REP Monitoring Commands
Command Purpose
show interface [interface-id] rep [detail] Displays REP configuration and status for a
specified interface or for all interfaces.
show rep topology [segment segment_id]
[archive] [detail]
Displays REP topology information for a segment
or for all segments, including the primary and
secondary edge ports in the segment.