Cisco ME 3400 User Manual

iii
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
CONTENTS
Preface xli
Audience xli
Purpose xli
Conventions xlii
Related Publications xlii
Obtaining Documentation and Submitting a Service Request xliii
CHAPTER 1 Overview 1-1
Features 1-1
Performance Features 1-2
Management Options 1-3
Manageability Features 1-3
Availability Features 1-5
VLAN Features 1-6
Security Features 1-6
Subscriber Security 1-6
Switch Security 1-7
Network Security 1-7
Quality of Service and Class of Service Features 1-8
Layer 2 Virtual Private Network Services 1-9
Layer 3 Features 1-9
Layer 3 VPN Services 1-10
Monitoring Features 1-10
Default Settings After Initial Switch Configuration 1-11
Network Configuration Examples 1-14
Multidwelling or Ethernet-to-the-Subscriber Network 1-14
Layer 2 VPN Application 1-15
Multi-VRF CE Application 1-16
Where to Go Next 1-17
CHAPTER 2 Using the Command-Line Interface 2-1
Understanding Command Modes 2-1
Understanding the Help System 2-3
Understanding Abbreviated Commands 2-3

Cisco ME 3400 Specifications

General

Category	Switch
Rack Mountable	Yes
Jumbo Frame Support	Yes
Authentication Method	RADIUS, TACACS+
RAM	128 MB
Flash Memory	32 MB
Power Device	Internal power supply
Model	ME 3400
Layer	Layer 2
MAC Address Table Size	8000 entries
Remote Management Protocol	SNMP, Telnet, SSH, HTTP, HTTPS
Features	VLAN support, IGMP snooping, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x
Memory	128 MB
Power Supply	AC 120/230 V (50/60 Hz)
Dimensions (H x W x D)	4.4 cm x 44.5 cm x 24.2 cm
Routing Protocol	Static routing