Contents
xxix
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
Configuring BGP PE to CE Routing Sessions 35-90
Multi-VRF CE Configuration Example 35-91
Displaying Multi-VRF CE Status 35-95
Configuring Protocol-Independent Features 35-95
Configuring Cisco Express Forwarding 35-95
Configuring the Number of Equal-Cost Routing Paths 35-97
Configuring Static Unicast Routes 35-97
Specifying Default Routes and Networks 35-98
Using Route Maps to Redistribute Routing Information 35-99
Configuring Policy-Based Routing 35-103
PBR Configuration Guidelines 35-103
Enabling PBR 35-104
Filtering Routing Information 35-106
Setting Passive Interfaces 35-106
Controlling Advertising and Processing in Routing Updates 35-107
Filtering Sources of Routing Information 35-108
Managing Authentication Keys 35-108
Monitoring and Maintaining the IP Network 35-109
CHAPTER
36 Configuring IPv6 Unicast Routing 36-1
Understanding IPv6 36-1
IPv6 Addresses 36-2
Supported IPv6 Unicast Routing Features 36-2
128-Bit Unicast Addresses 36-3
DNS for IPv6 36-3
Path MTU Discovery for IPv6 Unicast 36-4
ICMPv6 36-4
Neighbor Discovery 36-4
Default Router Preference 36-4
IPv6 Stateless Autoconfiguration and Duplicate Address Detection 36-4
IPv6 Applications 36-5
Dual IPv4 and IPv6 Protocol Stacks 36-5
DHCP for IPv6 Address Assignment 36-6
Static Routes for IPv6 36-6
RIP for IPv6 36-6
OSPF for IPv6 36-6
EIGRP IPv6 36-6
HTTP(S) Over IPv6 36-7
To Next Page
Loading...
