Cisco ME 3400 - Page 34

Contents
xxxiv
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
Configuring SSM 42-16
Monitoring SSM 42-16
Configuring Source Specific Multicast Mapping 42-17
Configuration Guidelines and Restrictions 42-17
SSM Mapping Overview 42-17
Configuring SSM Mapping 42-19
Monitoring SSM Mapping 42-22
Configuring a Rendezvous Point 42-22
Manually Assigning an RP to Multicast Groups 42-22
Configuring Auto-RP 42-24
Configuring PIMv2 BSR 42-28
Using Auto-RP and a BSR 42-32
Monitoring the RP Mapping Information 42-33
Troubleshooting PIMv1 and PIMv2 Interoperability Problems 42-33
Configuring Advanced PIM Features 42-33
Understanding PIM Shared Tree and Source Tree 42-33
Delaying the Use of PIM Shortest-Path Tree 42-35
Modifying the PIM Router-Query Message Interval 42-36
Configuring Optional IGMP Features 42-36
Default IGMP Configuration 42-37
Configuring the Switch as a Member of a Group 42-37
Controlling Access to IP Multicast Groups 42-38
Changing the IGMP Version 42-39
Modifying the IGMP Host-Query Message Interval 42-40
Changing the IGMP Query Timeout for IGMPv2 42-41
Changing the Maximum Query Response Time for IGMPv2 42-41
Configuring the Switch as a Statically Connected Member 42-42
Configuring Optional Multicast Routing Features 42-43
Configuring sdr Listener Support 42-43
Enabling sdr Listener Support 42-43
Limiting How Long an sdr Cache Entry Exists 42-44
Configuring an IP Multicast Boundary 42-44
Monitoring and Maintaining IP Multicast Routing 42-46
Clearing Caches, Tables, and Databases 42-46
Displaying System and Network Statistics 42-46
Monitoring IP Multicast Routing 42-47