Contents
xxxvii
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-07
Creating a Configuration File By Using a Text Editor B-10
Copying Configuration Files By Using TFTP B-10
Preparing to Download or Upload a Configuration File By Using TFTP B-10
Downloading the Configuration File By Using TFTP B-11
Uploading the Configuration File By Using TFTP B-11
Copying Configuration Files By Using FTP B-12
Preparing to Download or Upload a Configuration File By Using FTP B-13
Downloading a Configuration File By Using FTP B-13
Uploading a Configuration File By Using FTP B-14
Copying Configuration Files By Using RCP B-15
Preparing to Download or Upload a Configuration File By Using RCP B-16
Downloading a Configuration File By Using RCP B-17
Uploading a Configuration File By Using RCP B-18
Clearing Configuration Information B-18
Clearing the Startup Configuration File B-19
Deleting a Stored Configuration File B-19
Replacing and Rolling Back Configurations B-19
Understanding Configuration Replacement and Rollback B-19
Configuration Replacement and Rollback Guidelines B-20
Configuring the Configuration Archive B-21
Performing a Configuration Replacement or Rollback Operation B-22
Working with Software Images B-23
Image Location on the Switch B-23
tar File Format of Images on a Server or Cisco.com B-24
Copying Image Files By Using TFTP B-24
Preparing to Download or Upload an Image File By Using TFTP B-25
Downloading an Image File By Using TFTP B-26
Uploading an Image File By Using TFTP B-27
Copying Image Files By Using FTP B-28
Preparing to Download or Upload an Image File By Using FTP B-28
Downloading an Image File By Using FTP B-29
Uploading an Image File By Using FTP B-31
Copying Image Files By Using RCP B-32
Preparing to Download or Upload an Image File By Using RCP B-32
Downloading an Image File By Using RCP B-33
Uploading an Image File By Using RCP B-35
To Next Page
Loading...
