Cisco Nexus 3548

92
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
clear ip route
clear ip route
To clear individual routes from the unicast Routing Information Base (RIB), use the clear ip route
command.
clear ip route [* | addr | prefix]] [vrf vrf-name]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines Use the clear ip route command to clear individual routes from the route table.
Caution The * keyword is severely disruptive to routing.
This command does not require a license.
Examples This example shows how to clear the individual route:
switch(config)# clear ip route 192.0.2.1
Related Commands
* (Optional) Clears all routes.
addr (Optional) Clears this route. The format is x.x.x.x.
addr (Optional) Clears this prefix. The format is x.x.x.x/length.
vrf vrf-name (Optional) Specifies the virtual routing and forwarding (VRF) context name. The
name can be any case-sensitive, alphanumeric string up to 32 characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show ip route Displays entries in the route table.