Cisco Nexus 3548

497
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip process
show ip process
To display formation about the IP process, use the show ip process command.
show ip process [vrf vrf-name]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Examples This example shows details about the IP process:
switch(config)# show ip process
Related Commands
vrf vrf-name (Optional) Specifies the name of the virtual routing and forwarding (VRF)
instance. The vrf-name argument can be specified as any case-sensitive,
alphanumeric string up to 32 characters. The strings “default” and “all” are
reserved VRF names.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show running-config Displays the running configuration information.