496
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip prefix-list
show ip prefix-list
To display prefix lists for the Border Gateway Protocol (BGP), use the show ip prefix-list command.
show ip prefix-list [name]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Examples This example shows how to display the prefix lists:
switch(config)# show ip prefix-list
Related Commands
name (Optional) Name of the community list. The name can be any case-sensitive,
alphanumeric string up to 63 characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
ip prefix-list Configures a BGP prefix list.
To Next Page
Loading...
