Cisco Nexus 3548

196
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Commands
ip prefix-list description
ip prefix-list description
To configure a description string for an IP prefix list, use the ip prefix-list description command . To
revert to default, use the no form of this command.
ip prefix-list name description string
no ip prefix-list name description
Syntax Description
Command Default None
Command Modes Global configuration mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to configure a description for an IP prefix list:
switch# configure terminal
switch(config)# ip prefix-list test1 description “this is a test”
switch(config)#
Related Commands
name Name of the prefix list. The name can be any alphanumeric string up to 63
characters.
string Descriptive string for the prefix list. The string can be any alphanumeric string up
to 90 characters.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show ip prefix-list Displays information about IPv4 prefix lists.