474
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip load-sharing
show ip load-sharing
To display IP load sharing information, use the show ip load-sharing command.
show ip load-sharing
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Any command mode
Command History
Examples This example shows how to display the IP load sharing information:
switch# show ip load-sharing
Related Commands
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show ip load-sharing Displays IP load sharing.
To Next Page
Loading...
