Cisco Nexus 3548

425
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show hsrp summary
show hsrp summary
To display Hot Standby Router Protocol (HSRP) summary information for each HSRP group, use the
show hsrp summary command.
show hsrp summary
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines This command does not require a license but if you want to enable Layer 3 interfaces, you must install
the LAN Base Services license.
Examples This example shows how to display a summary of HSRP information:
switch# show hsrp summary
Related Commands
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
feature hsrp Enables the HSRP feature.
hsrp Configures HSRP groups.