Cisco Nexus 3548 User Manual

476
Cisco Nexus 3548 Switch NX-OS Unicast Routing Command Reference
OL-27852-01
Chapter Unicast Routing Show Commands
show ip ospf border-routers
show ip ospf border-routers
To display the Open Shortest Path First (OSPF) routing table entries to an Area Border Router (ABR)
and Autonomous System Boundary Router (ASBR), use the show ip ospf border-routers command.
show ip ospf [instance-tag] border-routers [vrf vrf-name]
Syntax Description
Command Default None
Command Modes Any command mode
Command History
Usage Guidelines Use the show ip ospf border-routers command to display information on ABRs. and ASBRs.
This command requires the LAN Enterprise Services license.
Examples This example shows how to display information about border routers:
switch# show ip ospf border-routers
Related Commands
instance-tag (Optional) Name of the OSPF instance. Use this tag to display OSPF
information about a specific OSPF instance. The instance-tag
argument can be a maximum of 20 alphanumeric characters.
vrf vrf-name (Optional) Specifies the name of the virtual routing and forwarding
(VRF) instance. The vrf-name argument can be specified as any
case-sensitive, alphanumeric string up to 32 characters. The strings
“default” and “all” are reserved VRF names.
Release Modification
5.0(3)A1(1) This command was introduced.
Command Description
show running-config
ospf
Displays the OSPF running configuration.

Cisco Nexus 3548 Specifications

General

Rack Units	1RU
Product Type	Switch
Form Factor	Rack-mountable
Jumbo Frame Support	9216 bytes
Input Voltage	100-240 VAC
Product Series	Nexus 3000
Model	Nexus 3548
Operating System	Cisco NX-OS
Ports	48 x 10GE SFP+
Latency	190 ns
Airflow	Front-to-back